SECTION VIII. HYDRAULIC SYSTEM

TB 9-2350-368-25

SECTION VIII. HYDRAULIC SYSTEM

HYDRAULIC SYSTEM. Part and components for the hydraulic system can be fabricated or

2-8.

purchased from stock.

a. Hydraulic Loop (M113A2/M548A1)

Bill Of Materials

Item

Nomenclature

Part Number

NSN

Qty

Coupling half quick disconnect

10865913

4730-00-800-2828

Nipple pipe

Bench stock

NOTE

Only the nose piece of the coupling half quick disconnect assembly

(1) is needed.

1. Thread nipple pipe (2) to match the threads of two nose pieces (1).

2. Connect nipple pipe (2) between two nose pieces (1). See Figure 2-29.

Figure 2-29. Hydraulic System Loop Fabrication

SECTION IX. MISCELLANEOUS

MISCELLANEOUS. This section tells you how to make several brackets. Some are very simple and

2-9.

need no instructions. These will be left up to the maker as to what design and size are needed (if needed at

all).

Bill Of Materials

Item

Nomenclature

Part Number

NSN

Qty

Bracket, mild steel

Bench stock

A/R

a. NATO Slave Receptacle Bracket

1. Fabricate NATO slave receptacle bracket from 1/8-inch mild steel stock.

2. Weld NATO slave receptacle bracket to powerplant frame, located at left rear corner.