Figure 4-21. Folding floor support assembly, removal, disassembly, reassembly and installation

TM 10-5410-223-14/1

Figure 4-21. Folding floor support assembly, removal, disassembly, reassembly and installation.

thimble (14) and ferrule (13), if separated.

b. Disassembly.

(2) Reconnect the body (12), terminal (11) and

(1) Remove nut (6, fig. 4-21) and bolt (7) and

clevis (10) and install clips (9).

remove tie block (8) from-the clevis (10).

(3) Install the tie block (8) onto the clevis (10)

(2) Remove clips (9) and separate the clevis (10)

and secure with bolt (7) and nut (6).

and terminal (11) from body (12).

f. Installation.

(3) Separate the ferrule (13), thimble (14) and

(1) Place the folding floor end of the folding

wire rope (15) only if required.

floor support assembly (5, fig. 4-21) in its proper

c. Inspection. Inspect all parts for wear and

position on the folding floor and secure by installing

damage.

washer (4) and screw (3).

d. Repair.

(2) Place the shelter end of the folding floor

(1) Replace worn or damaged parts.

support assembly (5) in its proper position on the

(2) Replace an irreparable folding floor support

folding floor and secure by installing washer (2) and

assembly.

bolt (1).

e. Assembly.

(1) Reconnect the wire rope (15, fig. 4-21),

Section XI. MAINTENANCE OF FOLDING ROOF ASSEMBLY

dents and holes.

a. Inspection.

b. Repair. Repair damaged roof accordingly.

(1) Inspect all parts for wear and damage.

(2) Inspect the raw panel for cracks, breaks,

4-60