Figure 4-20. Folding roof support assembly, removal, disassembly, reassembly and installation

TM 10-5410-223-14/1

Figure 4-20. Folding roof support assembly, removal, disassembly, reassembly and installation.

on the shelter and secure by installing washer (4) and

c. Inspection. inspect all parts for wear and

screw (3).

damage.

(2) Place the folding roof end of the folding roof

d. Repair.

support assembly (5) in its proper position on the

(1) Replace all worn or damaged parts.

folding roof and secure by installing washer (2) and

(2) Replace an irreparable folding roof support

screw (1) .

assembly.

e. Assembly.

4-21. Folding Floor Support Assembly

(1) Slide the bar (10, fig. 4-20) into the support

a. Removal.

(11) and secure with pin (9) and retaining ring (8).

(1) Remove bolt (1, fig. 4-21) and washer (2)

(2) Install the pin assembly (7) and secure with

securing the support assembly to the shelter.

rivet (6).

(2) Remove screw (3) and washer (4) securing

f. Installation.

the support assembly to the folding floor, and

(1) Place the shelter end of the folding roof

remove the folding floor support assembly (5).

support assembly (5, fig. 4-20) in its proper position

4-67