HYDRAULIC LINES-continued

TB 5-2520-551-24

HYDRAULIC LINES (cont.)

197. Position protective sleeve (item 56, C5131118-3) over generator pump high

pressure line (item 108, C511101O-1). Slide sleeve up hose until top of

sleeve is positioned just below channel bracket (item 6, C5110651-1). Trim

sleeve as necessary.

Using 1/4" flat tip screwdriver, tighten hose clamp

(item 60, AN737TW58) securing protective sleeve (item 56, C5131118-3).

198. Connect generator pump high pressure line (item 108, C511101O-1) onto union

(item 113, AN815-12D) and tighten using 1-1/4" combination wrench while

holding union (item 113, AN815-12D) connected to generator pump high

pressure flex hose (item 99, C5122512-1) using 12" adjustable wrench.

199. Position protective sleeve (item 55, C5131118-2) over A/C pump suction hose

(M6000HO0304).

Slide sleeve up hose until top of sleeve is positioned just

below channel bracket (item 6, C5110651-1). Trim sleeve as necessary.

Using 1/4" flat tip screwdriver, tighten hose clamp (item 59, AN737TW30)

securing protective sleeve (item 55, C5131118-2).

200. Slide hose clamp (item 112, AN737TW46) onto A/C pump suction hose

(M6000HO0304).

Push hose onto union of tandem pump (C5122498-1). Using

1/4" flat tip screwdriver, tighten hose clamp (item 112, AN737TW46).

201. Position protective sleeve (item 55, C5131118-2) over generator pump

suction hose (M6000DO0307). Slide sleeve up hose until top of sleeve is

positioned just below channel bracket (item 6, C5110651-1). Trim sleeve as

Using 1/4" flat tip screwdriver, tighten hose clamp (item 59,

necessary.

AN737TW30) securing protective sleeve (item 70, C5131118-2).

202. Slide hose clamp (item 59, AN737TW30) onto generator pump suction hose

Push hose onto union of tandem pump (C5122498-1). Using

(M6000DO0307).

1/4" flat tip screwdriver, tighten hose clamp (item 59, AN737TW30).

203. In truck bed, connect union to A/C sense line (item 110, C5111012-1).

Tighten union (item 114, AN815-4D) using 12" adjustable wrench while

holding A/C sense line (item 110, C5111012-1) using 9/16" combination

wrench.

204. Connect A/C sense flex hose (item 95, C5122508-1) onto union (item 114,

AN815-4D) and tighten using 9/16" combination wrench. Hold union (item

114, AN815-4D) using 12" adjustable wrench.

205. Position protective sleeve (item 54, C5131118-1) over A/C sense line flex

hose (item 95, C5122508-1). Slide sleeve down flex hose (item 95,

C5122508-1). Using 9/16" combination wrench, hold A/C sense flex hose

(item 95, C5122508-1). Using 12" adjustable wrench, tighten quick

disconnect (item 101, C5131409-1) to flex hose (item 95, C5122508-1). Trim

sleeve as necessary, and secure with tiedown strap (item 73, MS3367-2-0).