SKID PLATE-continued

TB 5-2520-551-24

SKID PLATE (cont.)

218. Using 3/8" drive ratchet handle, and 7/16" socket, secure spacer plate

(C5132683-1) onto curbside skid plate bracket (item 4, C5118947-1) with two

bolts (MS35200-74), flat washers (item 45, AN960C416), lock washers (item

47, NAS1640-416), and nuts (item 43, MS51971-1).

219. Secure spacer plate (C5132683-1) and skid plate bracket (item 4,

C5118947-1) to fuel and brakeline crossmember using two available holes.

Using 3/8" drive ratchet handle, and 1/2" socket, tighten two bolts

(MS35307-338), flat washers (AN960C516), lock washers (item 63,

NAS1640-516), and nuts (item 64, MS51971-2).

220. Position skid plate (item 3, C5118946-1) under tandem pump assembly

(C5122498-1).

Secure skid plate (item 3, C5118946-1) with six bolts (item

38, MS90725-62), nuts (item 44, MS51971-3), flat (item 46, AN960C616) and

lock washers (item 48, NAS1640-616). Using 3/8" drive ratchet handle,

9/16" socket, and 9/16" combination wrench, tighten bolts (item 38,

MS90725-62).

221. Fill hydraulic reservoir with approximately 8 gallons of Mil-F-17111.

Recheck fluid level after running the hydraulic system.