HYDRAULIC RESERVOIR ASSEMBLY-continued

TB 5-2520-551-24

HYDRAULIC RESERVOIR ASSEMBLY (cont.)

177. Feed tandem pump case drain tube through clearance plate in bed of truck

and connect to union on reservoir (C5122481-1). Using 7/8" combination

wrench, tighten tandem pump case drain tube (item 106, C5111OO8-1) while

using 12" adjustable wrench to hold union on reservoir (C5122481-1).

178. Feed generator pump low pressure return line through clearance plate in bed

of truck, and connect to reservoir (C5122481-1). Using 1 1/4" combination

wrench, tighten generator pump low pressure line (item 107, C5111OO9-1)

while using 12" adjustable wrench to hold union on reservoir (C5122481-1).

179. Connect HG/AC case drain line (item 111, C5111013-1) to reservoir

(C5122481-1). Using 7/8" combination wrench, tighten HG/AC case drain line

(item 111, C5111013-1) while using 12" adjustable wrench to hold elbow on

reservoir (C5122481-1).

180. Connect HG/AC return line (item 97, C512251O-1) to reservoir (C5122481-1).

Using 1 1/2" combination wrench, tighten HG/AC return line (item 97,

C512251O-1) while using 15" adjustable wrench to hold elbow on reservoir

(C5122481-1).

181. Position a 24" piece of insulation sleeving (item 92, M23053/5-108-0) over

W-33 cable where wire connections are to be made to reservoir. Connect

three wires of W-33 cable (item 29, C5110787-1) to hydraulic reservoir

(C5122481-1).

Observe tags for proper installation (blue to white, red to

red, and yellow to green).

Crimp splice fasteners (item 89, M7928/5-4)

using crimping pliers.