HYDRAULIC RESERVOIR ASSEMBLY-continued

TB 5-2520-551-24

HYDRAULIC RESERVOIR ASSEMBLY (cont.)

173. Install hydraulic reservoir and secure with four bolts (item 37,

MS90725-8), lock washers (item 47, NAS1640-416), and flat washers (item 45,

AN960C416) using 3/8" drive ratchet handle, 6" extension, and 7/16" socket.

174. Install clearance plate (item 13, C5122612-1) over the 1-1/2" slots cut

into bed. The lines will be routed through this plate. It is not

necessary to secure the plate at this time.

175. Install generator pump suction hose to union on reservoir (C5122481-1) and

feed through the clearance plate in bed of truck. Using 1/4" flat tip

screwdriver, tighten clamp (item 59, AN737TW30) on generator pump suction

hose (M6000DO0307).

176. Connect A/C pump suction hose (M6000HO0304) to union on reservoir

(C5122481-1), and feed through the clearance plate in bed of truck. Using

1/4" flat tip screwdriver, tighten clamp (item 112, AN737TW46) on A/C pump

suction hose (M6000HO0304).