W-33 VEHICLE CABLE ASSEMBLY-continued

TB 5-2520-551-24

W-33 VEHICLE CABLE ASSEMBLY (cont.)

Cut engine temperature sensor wire located below roadside alternator using

85.

diagonal cutting pliers.

86.

Strip insulation from both ends of the engine temperature sensor wires.

87.

Connect both ends of the engine temperature sensor wires to W33 ENG TEMP

wire with splice (item 89, M7928/5-4) using crimping tool.

88.

Cut -12V alternator wire located behind roadside alternator using diagonal

cutting pliers.

89.

Strip insulation from ends of -12V alternator wire.

Connect ends of -12V alternator wire to W33 12V ALTNTR (NEG) wire with

90.

splice fastener (item 89, M7928/5-4) using crimping tool.

Using 10 mm wrench, connect W33E2 to ground terminal post on roadside

91.

alternator.

Tighten nut on ground terminal post.

92.

Using cable ties, secure W-33 vehicle cable (item 29, C5110787-1) away from

exhaust manifold along with existing routed wires and fasteners.