W-65 SPEED CONTROL CABLE ASSEMBLY-continued

TB 5-2520-551-24

W-65 SPEED CONTROL CABLE ASSEMBLY (cont.)

NOTE

There are two wires on terminals A3TB2-3 and A3TB2-5.

108. Using 3/16" flat tip screwdriver, connect six wires from W-65 cable (item

31, C5118955-1) (TB1-1 through TB1-6) to terminal block TB1 of RPM

Observe wire band markers for proper

regulator (item 32, C5122557-1).

installation.

109. Using 3/16" flat tip screwdriver, connect six wires from W-65 cable (item

31, C5118955-1) (TB2-1 through TB2-6) to terminal block TB2 of RPM

regulator (item 32, C5122557-1). Observe wire band markers for proper

installation.

110. On dashboard, install two U-nuts (item 51, C5131383-1) to RPM regulator

mounting holes.

111. Install RPM regulator assembly (item 32, C5122557-1) and secure with two

screws (item 50, MS51959-70B) using NO.2 cross tip screwdriver.