W-65 SPEED CONTROL CABLE ASSEMBLY-continued

W-65 SPEED CONTROL CABLE ASSEMBLY (cont.)

TB 5-2520-551-24

102. Remove and retain retaining nut from toggle switch barrel using 9/16"

combination wrench. Remove switch from mounting hole in lockout assembly

housing.

103. Connect W65S1 and W65S2 to transfer case lockout switch (terminals 1 and 2)

using 3/16" flat tip screwdriver. Secure W-65 cable (item 31, C5118955-1)

with tiedowns (item 73, MS3367-2-0) using tiedown tool.

NOTE

The spring-loaded toggle switch is a normally-open

Ensure switch toggle lever is in an upward

switch.

For proper operation,

position when door is open.

listen for an audible click when closing door.

104. Place switch through mounting hole in housing. Reinstall retaining nut and

tighten using 9/16" combination wrench.