Marking Equipment.

MWO 9-2330-392-20-2

Figure 18

14. Marking Equipment.

After modification procedures have been completed, mark MWO number 9-2330-392-

20-2 in MWO APPLIED block and date applied in DATE block on MWO identification

plate P/N 10930014.

1) To install the MWO identification plate on cargo trailers, locate and drill a .129 -

.133 inch diameter hole in the front cargo body above the shipping data plate (see

Figure 18 ). Using a rivet gun and hand-set pull one rivet, P/N 12449496-1, from

inside the cargo box fastening the MWO identification plate to the front cargo body.

Installing the rivet from inside of the cargo box prevents any sharp edges on the inside

wall of the cargo box.

2) To install MWO identification plate on chassis trailers, locate and drill a .129 - .133

inch diameter hole in the rear fender above the rear reflector (see Figure 19). Using a

rivet gun and hand set pull one rivet, P/N 12449496-1, fastening the MWO

identification plate to rear fender.