 |
|||
|
|
|||
|
Page Title:
Figure 2-35. Formulation Tank Filler Cap |
|
||
| ||||||||||
|
|
  TM 5-3740-214-14
SHUTDOWN PROCEDURES (Continued)
(6) Shut the solenoid valve switch OFF.
(7) Shut the engine ignition switch OFF.
(8) Aim assembly up at a 45°angle and to the rear of the vehicle.
f.
If the aerosol generator is going to be stored for more than three days, flush the formulation tank and the fluid
lines.
(1) Pressurize the formulation tank.
(2) Drain the formulation tank.
WARNING
BE ALERT to hold the drain hose in the bucket. The pressure on the tank may cause the hose to
jump around and splash insecticide.
(a) Hold the drain hose in a bucket.
(b) Open the tank drain valve and drain the tank.
(c) Make sure the drain valve closes.
Figure 2-35. Formulation Tank Filler Cap
(3) Service the formulation tank with one to two gallons of soap and water.
(a) Open tank pressure drain valve.
(b) Loosen the filler cap retaining screw and turn the cap bracket down.
(c) Remove the filler cap.
(d) Partially fill the tank with one to two gallons of soap and water.
(e) Place the filler cap back on the tank. Make sure it seats correctly.
2-31
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals