SECTION V. ELECTRICAL SYSTEM

TB 9-2350-368-25

SECTION V. ELECTRICAL SYSTEM

ELECTRICAL SYSTEM. The electrical system is a 24-volt system using four 6 TL batteries

2-5.

arranged in parallel series. The master switch is installed in the negative return. Four circuit breakers are

used to isolate problems to a particular circuit, reducing troubleshooting time. An electrical transmission

controller selects all of the ranges in the M113A3 transmission. Both 100-amp and 200-amp generator

regulators are provided so that any 6V53 engine may be operated and tested without being damaged. A

connector panel is provided for connecting the 100-amp generator system. An instrument panel is also

provided. See Section VI for instrument panel.

a. 100-Amp Connector Panel

Bill Of Materials

Item

Nomenclature

Part Number

NSN

Qty

1/8" Aluminum Plate

9 by 4-1/4 inches (22.86 by 10.795 cm)

1. Drill two 1-3/8-inch connector holes and eight 5/16-inch screw holes per Figure 2-18.

2. Drill 1-3/4-inch connector hole and four 5/16-inch screw holes per Figure 2-18.

3. Scribe identification information on panel or make labels per Figure 2-18.

4. Drill three 5/16-inch mounting holes spaced three inches apart. See Figure 2-18.

Figure 2-18. 100-Amp Connector Panel