MAGNA-MATIC SYSTEM

TM 5-4240-501-14P IGNITION Magna-Matic Fig. 42 - Removing Bushing and Plunger To Install Bushing and Plunger Insert the plunger in the new bushing as shown in Fig. 43. Fig. 43 - Inserting New Plunger in Bushing Fig. 44 - Inserting Plunger and Bushing in Cylinder Insert plunger and bushing into the cylinder. Use a hammer and the old bushing to drive the new bushing into the cylinder until the new bushing is flush with the face of the cylinder. Check to be sure the plunger operates freely. Fig. 44. MAGNA-MATIC SYSTEM Engine Models 9-14-19-23-191000-231000 Fig. 45 - Magna-Matic System Remove Flywheel Use puller 19203 or 19068, running puller screws into holes tapped into flywheel. Continue to tighten screws until flywheel loosens. Fig. 46. NOTE: Use flywheel nut to protect crankshaft threads. Fig. 46 - Removing Flywheel 2 12