TM 9-2330-285-14&P/TO 36A11-21-10-1
REAR HARNESS AND RECEPTACLE - LATE MODELS
This task covers:
INITIAL SETUP
Applicable Configurations
Tools
Late models
7/16-inch wrench (two required)
Cross-tip screwdriver
Diagonal cutting pliers
Equipment Condition
Materials/Parts
Plastic wire ties (ten required)
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Take off using two 7/16-inch wrenches.
1 Rear axle
Four screws (1),
four nuts (2),
four washers (3),
cover (4) and
receptacle (5)
Cut off using cutting pliers.
Ten plastic wire
2
Throw away wire ties.
ties (6)
Take off of rear axle.
Harness (7)
3
INSTALLATION
Position on rear axle.
Harness (7)
4 Rear axle
Secure harness (7) to brake line (8) with
Ten new plastic
5
wire ties (6).
wire ties (6)
Four screws (1),
Secure receptacle (5) and cover (4) with
6
four nuts (2),
screws (1) and nuts (2) using two 7/16-inch
wrenches.
four washers (3),
cover (4) and
receptacle (5)