Section IV. OPERATION UNDER UNUSUAL CONDITIONS

TM 11-6625-539-14-4

CAUTION

nect the test leads from the remote test jacks.

Fold them so that they fit into the equipment

Remove batteries before shipment or in-

cover. Position the cover on the test set and

active storage of 30 days or more.

secure the four latches.

Section IV. OPERATION UNDER UNUSUAL CONDITIONS

2-20. Operation Under Various Moisture or

2-18. General

Humidity Conditions

This test set is normally used in an electronics

a. During on-location testing of equipment, pro-

repair shop and is not usually subjected to ex-

tect the test set from direct contact with rain or

treme climatic or other environmental conditions.

other moisture. Heavy collections of moisture on

In general, give it the same environmental protec-

the front panel test jacks could affect meter indi-

tion that is required for the equipment it is being

cations during testing of semiconductor devices.

used to test.

b. Take particular care to prevent the unit from

2-19. Operation Under Extreme Temperture

being splashed with or dropped into salt water.

Conditions

Salt water is a good conductor of electricity and

Temperature conditions in which this test set can

could adversely affect test outputs.

normally be operated (32° to 122°F (0° to 50°C

max)) will not have any marked effect upon its

c. Whenever possible while the unit is exposed

operation or its accuracy. You should not subject

to moisture or conditions of high humidity, keep

the unit to higher or lower temperature than

the cover on the case to seal out any moisture.

absolutely required.

Open the case only while the unit is being used.