 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  TM 11-6625-524-14-4
INSTALLATION
PACKAGING DATA
a. Voltmeter, Electronic AN/URM-145D may arrive packed for either domestic or
overseas shipment.
b. When Voltmeter, Electronic AN/URM-145D is packed for overseas shipment, it
is placed in a corrugated carton surrounded with packing material. The carton is
sealed with gummed tape. The boxed equipment is then placed in a moisture-vapor-
proof barrier, which is heatsealed, and this package is placed in a waterproof
corrugated carton. The technical manual is placed under the lid and the carton is
sealed with waterproof tape.
UNPACKING
a. For unpacking overseas shipment equipment proceed as follows:
(1) Open the outer corrugated carton and break the sealed moisture-vapor-
p r o o f barrier. L i f t out the inner corrugated carton.
(2) Open the inner corrugated carton. Remove the equipment in its packing
material and remove the packing material.
b. For unpacking domestic shipment the instructions above also apply. If a
heavy wrapping paper has been used, remove it carefully and take out the equip-
ment.
CHECKING UNPACKED EQUIPMENT
a. Inspect the equipment for damage incurred during shipment. If the equipment
has been damaged, report the damage on SF 364 (para 1-3b).
b. Check the equipment for completeness against the packing slip. Report all
discrepancies in accordance with paragraph 1-3. The equipment should be placed in
service even though a minor part that does not affect proper functioning is missing.
c. After the equipment has been thoroughly checked, clean all items with a
soft cloth. Apply cleaning solvents only as necessary.
ITEMS COMPRISING AN OPERABLE EQUIPMENT (figure 2-1)
a.
Voltmeter, Electronic ME-247D/U.
b.
3 wire grounded AC line power cord.
c.
Type BNC 50-ohm termination adapter.
d.
DC output phone plug.
e.
High impedance probe tip.
f.
RF probe type G.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals