INSTALLATION-continued

TM 9-2350-222-34-1

FUEL TANK (LEFT) LOWER FRONT MOUNT REPLACEMENT (Sheet 4 of 4)

NOTE

If bracket will not install, have second person

lift bracket on tank. If upper rear and upper

front mounts were loosened during removal,

tighten upper rear mount (page 4-35, step 7)

and upper front mount (page 4-32, steps 12

and 13).

2. Install assembled mount (H) to fuel tank bracket (J).

After mount is installed rotate 180 degrees to aline

bracket (K) to hull floor. Secure to hull floor using two

screws and washers (L).

3. Using two 15/16 inch wrenches, tighten screw (M)

and nut (N).

4. Using 1/2 inch wrench, tighten two screws (L).

5. Install fire extinguisher tube and coupling (TM 9-

2350-222-20-1).

6. Install fuel shut-off cable assembly (page 4-72).

7. Install accelerator linkage assembly (page 4101).

8. Install powerplant (TM 9-2350-222-20-1).

9. Fill left fuel tank.

End of Task

TA130480

4-16