REMOVAL

TM 9-2350-222-34-1

FUEL TANK (LEFT) LOWER FRONT MOUNT REPLACEMENT (Sheet 2 of 4)

REMOVAL:

1. Using 1/2 inch wrench, remove two screws and

washers (A) holding front mount (B) to hull floor (C).

2. Using two 15/16 inch wrenches, loosen screw (D)

and nut (E).

NOTE

If bracket and mount will not rotate,

loosen upper rear mount (page 4-34

step 1) and upper front mount (page 4-

29 step 9). Have second man lift fuel

tank while rotating mount. Use hammer

if required.

3. Rotate lower bracket and mount (B) 180 degrees

and remove from upper bracket (F).

4. Using two 15/16 inch wrenches, remove screw (G), washer (H), nut (J) and washer (K).

5. Separate rubber mounts (L) and washers (M) from bracket (N).

Go on to Sheet 3

TA130478

4-14