ASSEMBLY-continued

TM 9-2350-222-341

AIR CLEANER FAN REPAIR (Sheet 10 of 11)

5. Using a rule, measure distance between outside end

of vanes and flange on motor (C).

6. This distance should be 1-5/8 inch. If distance is not

7. Using socket, install nut (F).

correct, remove impeller (D) and add on (or take away)

shim washers (B) as necessary.

8. Install new packing (G) in motor groove.

9. Install new packing (H) over leads and onto capacitor

(J).

10. Insert leads (K) and capacitor (J) through mounting

place on housing (L) and opening in flange of motor (C).

11. Install motor (C) into housing (L) and through

opening in flange.

12. Using 1/4 inch screwdriver, install four screws (M)

with

new

lockwashers

(N).

Go on to Sheet 11

TA252582

Change 1 4-11