TM 9-2350-222-20-1-5
LOWER ENGINE ACCESS COVER REPLACEMENT (Sheet 1 of 2)
TOOLS:
9/16 in. socket with 1/2 in. drive
Putty knife
5 in. extension with 1/2 in. drive
SUPPLIES:
Gasket (11591161)
Small brush
Lockwasher (MS35335-35) (3 required)
PRELIMINARY PROCEDURE:
REMOVAL:
1.
Using socket, remove three screws, lockwashers, and washers (A). Throw lockwashers away.
2.
Using socket, loosen four screws (B). Do not remove four screws (B).
NOTE
If lower engine access cover
(C) sticks to bulkhead, it may
be loosened by reaching
through upper engine access
and applying pressure to
cover from behind.
3.
Manually lift lower engine access cover up and away from bulkhead.
Go on to Sheet 2
TA253563