 |
|||
|
|
|||
|
Page Title:
TRANSMISSION DRAIN ACCESS COVER REPLACEMENT (Sheet 1 of 1) |
|
||
| ||||||||||
|
|
  TM 9-2350-222-20-1-5
TRANSMISSION DRAIN ACCESS COVER REPLACEMENT (Sheet 1 of 1)
Putty knife
TOOLS:
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
SUPPLIES:
Adhesive (Item 4, Appendix D)
Dry cleaning solvent (Item 54, Appendix D)
Gasket (10863983)
Rags (Item 65, Appendix D)
Lockwasher (MS35338-65) (6 required)
PERSONNEL: Two
REMOVAL:
1.
Two persons crawl under rear of vehicle
and locate transmission access cover (A).
2.
With one person holding access cover (A),
second person, using socket, remove six
screws (B) and lockwashers (C). Throw
lockwashers (C) away.
3.
Remove access cover (A) and gasket (D).
Throw gasket away.
4.
Using putty knife, rags, and dry cleaning
solvent (Item 54, Appendix D), remove any
old gasket material from cover and mating
surface on hull.
INSTALLATION:
1.
Apply adhesive (Item 4, Appendix D) to new gasket (D) and position onto access cover (A).
2.
With one person holding access cover (A) and gasket (D) in position, second person, using socket,
install six screws (B) and new lockwashers (C) securing access cover (A) to vehicle.
End of Task
TA253561
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals