 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  TM 9-2350-222-20-1-5
TOWING PINTLE REPAIR (Sheet 4 of 5)
3.
Place spring (D) in installation position in latch
(E).
4.
Place latch (F) in installation position in latch
(E).
5.
Using hammer, install pin (G) securing latch (F)
to latch (E).
6.
Using hammer and center punch, stake pin (G)
in four places to latch (E).
7.
Slide sleeve (H) onto pintle (B).
8.
Place latch (E) in installation position on
pintle (B).
9.
Install bolt (J) through latch (E) and pintle
(B). Install nut (K) on bolt (J).
10.
Using 1-1/2 inch socket and 1-1/2 inch
wrench, tighten bolt (J) and nut (K).
11.
Aline hole in bolt (J) with slot in nut (K).
12.
Using pliers, install new cotter pin (L)
through nut (K) and bolt (J).
13.
Place flat washer (M) and nut (N) on towing
pintle (B).
14.
Place crowbar through hole in towing pintle (B).
15.
Using 3-1/4 inch socket, tighten nut (N), while
other person holds crowbar.
TA140619
16-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals