 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  TM 9-2350-222-20-1-5
TOWING PINTLE REPAIR (Sheet 2 of 5)
DISASSEMBLY:
1.
Using pliers and hammer, remove cotter pin (A)
from nut (B) at rear of towing pintle (C). Throw
cotter pin away.
2.
Place crowbar through hole of towing pintle (C).
3.
With one person holding crowbar, second
person, using 3-1/4 inch socket, remove nut
(B) and flat washer (D).
4.
Pull cotter pin (E) that is hooked to chain out
of towing pintle (C).
5.
Using pliers, remove cotter pin (F). Throw
cotter pin away.
6.
Place 1-1/2 inch wrench on nut (G).
7.
Using 1-1/2 inch socket, remove nut (G) and
bolt (H) securing latch (J) to towing pintle (C).
8.
Remove latch (J).
Go on to Sheet 3
TA140617
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals