Mounting Hardware, M880 Installation only.

TB 9-2300-422-20

a. The design of the steering column on the M880 vehicle will not permit the use of a standard clamp as a chain

attachment. The following procedure should be utilized.

b. Attach fixed end of chain with a 3/8 in. (9.5 mm) machinescrew, lockwasher, and nut into manufacturer's hole that

is located in the rear of seat riserplate on the operator's side of vehicle. Fasten the chain on the inboard side of riser (Fig.

3). The nut is to be located on the outboard side of riser and, after securing, the screw should be staked to prevent

removal.

Figure 3. Chain in the Stowed Position.

2-4. Mounting Hardware, M880 Installation only.

NOMENCLATURE

PART NUMBER

NSN

Screw

MS35308-364

5305-00-801-5747

Washer

MS35338-141

5310-00-984-7042

Nut

MS51968-8

5310-00-732-0559