 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  TB 9-2300-422-20
2-5. Procedure for M1008 Cargo.
WARNING
During vehicle operations the chain should be stored beneath the driver's seat, looping chain
upon itself, and securing it with a padlock to prevent entanglement with driver's feet. Do not allow
additional locks to remain on the security chain, as this may impair proper stowage.
a. Drill a 27/64 inch hole in front end of left hand seat riser bracket. Locate hole 9/16 inch from top of bracket and
5/8 inch from outboard edge of bracket. Insert screw threaded area forward into hole, attach end of chain with washer and
nut, then tighten. After tightening, the nut should be staked to prevent removal (Fig. 4). Position chain around steering
wheel spokes and secure with padlock.
b. Parts required are as follows:
NSN
NOMENCLATURE
QTY
Screw
1
5305-00-801-5747
Washer
1
5310-00-984-7042
Nut
1
5310-00-732-0559
Chain
30 inch
5340-00-158-3805
Figure 4. M1008 Cargo Chain Position.
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals