Quantcast Meter Reognition multimeter should be left in when the meter is secured? Figure 1-50. - Multimeter reading practice. Q.68 What type of meter is shown and what is the value of the quantity being measured for each meter in figure 1-51? Q.69 If the insulation of a conductor was being measured in figure1-51 (A), would the reading indicate a good insulation? ">

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  

Figure 1-49. - Meter recognition.

32NE0258.GIF (6060 bytes)

Q.66 What meter reading is shown on each multimeter in each part of figure 1-50? answer.gif (214 bytes)
Q.67 Which part of figure1-50 shows the switch positions the multimeter should be left in when the meter is secured? answer.gif (214 bytes)

Figure 1-50. - Multimeter reading practice.

32NE0259.GIF (10087 bytes)

Q.68 What type of meter is shown and what is the value of the quantity being measured for each meter in figure 1-51?answer.gif (214 bytes)
Q.69 If the insulation of a conductor was being measured in figure1-51 (A), would the reading indicate a good insulation? answer.gif (214 bytes)

Figure 1-51. - Meter reading practice.

32NE0260.GIF (23284 bytes)

Q.70 What type of frequency meter is shown and what is the value indicated for each meter in figure1-52?answer.gif (214 bytes)




Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.