Chapter 2. INSTALLATION AND OPERATING INSTRUCTIONS

TM 11-6120-247-14-1

CHAPTER 2

INSTALLATION AND OPERATING lNSTRUCTlONS

Section I. SERVICE UPON RECEIPT OF EQUIPMENT

the cardboard carton.

2 - 1 . Unpacking

(fig. 2-1)

(4) Open the moisture and vapor proof barrier in

the cardboard container.

a. Packaging Data. When packed for shipment,

(5) Remove the enclosed cardboard carton.

Power Supply PP-3940A/G is placed in a carton and

(6) Cut the waterproof tape that seals the tap of

packed in a 7- by 19- by 11-inch outer corrugated car-

the cardboard carton.

ton. A typical packaging diagram is shown in figure

(7) Remove the humidity indicator, the desiccant,

2-1. The volume is 0.85 cubic foot and the total weight

and the pads.

is 35 pounds.

(8) Remove the power supply.

b. Removing Contents.

(1) Cut the waterproof tape that seals the top of

2-2. Checking Unpacked Equipment

the shipping carton.

a. Inspect the equipment for damage incurred dur-

(2) Remove the inclosed cardboard carton.

ing shipment. If the equipment has been damaged, re-

(3) Cut the waterproof tape that seals the top of

Ftgure 2-1, Power Supply PP-3940A/G, Packaging Diagram

2-1

Change 1