TM 9-4910-609-14&P
DISASSEMBLY, REPAIR, REPLACEMENT, REASSEMBLY
Action
Disassemble
5.1
Unscrew Item 5.4.
Partholding Assembly, item 5
1.
Lift assembly and remove.
2.
Remove retaining ring, Item 3-2,
1.
Overhanging arm, Item 4
push out assembly.
2.
Remove assembly.
Unscrew Item 1-10 (2 places)
1.
Drive Guide, Item 3
Unscrew Item 1-8 (2 places)
2.
Remove Item 1-6.
3.
Lift assembly and remove.
4.
Remove tubing, Item 2-8, by loosening
1.
Reservoir, Item 2
both nuts at each end.
2.
Unscrew 4 bolts ea (Item 2-3).
Lift assembly and remove.
3.
5.2
Repair
Standard
No special technique is required to repair this fixture.
shop practices are applicable.
Replacement
5.3
See Parts List.
Action
Reassemble
1.
Locate holding assembly, Item 5, on
Holding Assembly, Item 5
top of lifting arm fixture, Item 4,
so that stud goes through guide hole,
(placing bearing retainers, Item 5-5,
on top and bottom of hole).