TM 9-2330-371-14&P
BOGIE ASSEMBLY
This task covers:
INITIAL SETUP
Tools Continued
Tools
Wrench, 1 1/2-inch, open-end
Chain, 20 feet
Wrench, torque, 0 to 1000 foot pound capacity
Extension, 3/4-inch drive, 5-inch
Hoist, overhead, 10-ton
Personnel Required
Jack, hydraulic, 20-ton,
(two required)
Two
Sling, two-leg chain, w/ring
Socket, 1 7/16-inch, 3/4-inch drive
Equipment Condition
Socket, 1 5/8-inch, 3/4-inch drive
Support stands, safety, 10-ton
(two required)
Wrench, 1/2-inch, open-end
Wrench, 5/8-inch, open-end
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Swivel connector (3)
T-fitting (1)
1.
Using 5/8-inch wrench and 1/2-
and hose (2)
inch wrench, unscrew and take out.
Repeat for other axle.
Saddle (5)
2.
Spring
Put on spring assembly (4) and under two
assembly (4)
U-bolts (6).
Four nuts (7)
Two U-bolts (6)
3.
Screw on and tighten using 1 7/16-inch
socket and handle.
Eight nuts (10),
Two mounting
4.
Using 1 5/8-inch socket, handle, and
Iockwashers (11),
brackets (8)
1 1/2-inch wrench, unscrew and take out.
and bolts (12)
and two support
It maybe necessary to use an ex-
brackets (9)
nuts loose.