TM 9-2330-297-14&P
LICENSE PLATE LIGHT LAMP AND LENS
This task covers:
b. Installation (page 4-24)
INITIAL SETUP
Tools
Materials/Parts
Screwdriver, flat-tip
Lamp
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.License plate
Retaining ring
a. Using screwdriver, pry off retaining
light
(1), lens (2),
ring (1).
gasket (3) and
b. Remove lens (2) and gasket (3).
lamp (4)
c. Push lamp (4) into socket (5) and turn
counterclockwise.
d. Remove lamp (4).
INSTALLATION
2.
Lamp (4), gasket
a. Push lamp (4) into socket (5) and turn
(3), lens (2)
clockwise to secure.
and retaining
b. Place gasket (3) and lens (2) on light
ring (1)
base (6) with frosted surface of lens
(2) toward ground.
c. Snap retaining ring (1) into groove of
light base (6).
4-24