TM 9-2330-231-14&P
ORGANIZTIONAL PREVENTIVE MAINTENENACE CHECKS AND SERVICES - CONTINUED
S-SEMIANNUALLY A-ANNUALLY
INTERVAL
ITEM TO BE INSPECTED
ITEM
PROCEDURE: CHECK FOR AND HAVE REPAIRED, FILLED
NO.
S
A
REPLACED OR ADJUSTED AS NEEDED.
2
BODY AND FUSE BOX
Look for cracks, dents, and good security.
3.
BRAKE MASTER CYLINDER
Check fluid level in master cylinder. Fill to 1/2inch
from top.
4.
a.
b.
Clean, inspect, and repack wheel bearings.
5.
BRAKE ASSEMBLIES
a.
Clean, inspect, and repair or replace internal brake parts
b.
6.
WHEELS AND TIRES
a.
Tighten wheel nuts to 450 - 500 ft lb (610.2 - 678 Nm) using a
b.
Check tread depth.
7.
SUSPENSION
a.
Check suspension for bent or cracked parts, loose mounting, and
worn bushings.
b.
Check shock absorbers for damage or leaks.
Section V. ORGANIZATIONAL TROUBLESHOOTING PROCEDURES
Page
Page
Explanation of Columns ..................................
Symptom Index ............................................
General .........................................................
4-9