TM 9-2330-205-14&P
LUNETTE
This task covers:
lNITIAL SETUP
Materials/Parts
Tools
Cotter pin
Pliers, diagonal-cutting
Wrench, open-end, 1 1/2-inch
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Lunette shank (1)
1.
Cotter pin (2),
a. Using pliers, remove cotter pin (2).
nut (3), and fiat
Discard cotter pin (2).
washer (4)
b. Using 1 1/2-inch open-end wrench,
remove nut (3) and washer (4).
Lunette (6)
2.
Chassis (5)
Slide out of chassis (5).
INSTALLATION
Lunette (6)
Slide into hole in chassis (5).
Chassis (5)
3.
Position in high or low position as
required.
a.
Install washer (4) and nut (3)
Flat washer (4),
4.
Lunette shank (1)
nut (3), and
and torque nut to 400-450 lb- ft.
b.
Install cotter pin (2).
cotter pin (2)
TASK ENDS HERE
TA223354