National Item Identification Number
00-064-8343
000648343
4310-00-064-8343
4310000648343
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
4310
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
0AT62
30760
INGERSOLL RAND CO
200 CHESTNUT RIDGE RD
636
WESTWOOD
NJ
07675
201-573-0123
0AT62
30760
INGERSOLL RAND CO
200 CHESTNUT RIDGE RD
636
WESTWOOD
NJ
07675
201-573-0123
Reference Numbers (Part Numbers)
183047-3021
183047-3021
183047-3021
183077PC3021
183077PC3021
183077PC3021
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END SLOT DEPTH
FIRST END S
Required Description
STEEL
10 SLOTTED
1.0000 INCHES NOMINAL
0.192 INCHES NOMINAL
0.189 INCHES NOM