|
| |
Back
INSTALL EXTERNAL LINES AND FITTlNGS | Up
TM-55-2835-208-23 Transportability Guidance Small Emplacement Excavator (SEE) High Mobility Entrencher (HME) High Mobility Material Handler (HMMH) Manual | Next
INSTALL EXTERNAL LINES AND FITTINGS (Continued) |
TM 55-2835-208-23
2-8
INSTALL EXTERNAL LINES AND FITTINGS (Continued)
2-8
NOTE
This task describes typical proce-
dures for installing external lines
and fittings.
Lightly lubricate
packings with
assembly fluid
(E31).
1.
Install fuel connection
bolt and elbow as
follows:
a.
b.
c.
d.
Using assembly fluid No. 1 (E31), lu-
bricate and install packing (12) on
fuel connection bolt (9).
Lubricate and install fuel connection
bolt (9) through fuel connection fit-
ting (11).
Using assembly fluid No. 1 (E31), lu-
bricate and install packing (10) on
fuel connection bolt (9).
Install fuel connection bolt (9) into
acceleration control assembly. Align
fuel connection fitting (11) with tube
assembly, then tighten fuel connec-
tion bolt.
2.
Install unions as follows:
a. Lubricate and install packing (4) on
union (3).
b. Install union (3)
GO TO NEXT PAGE
2-20
Change 4
|
