|
| |
Back
CLEAN AND INSPECT EXTERNAL LINES AND FITTINGS (Continued) | Up
TM-55-2835-208-23 Transportability Guidance Small Emplacement Excavator (SEE) High Mobility Entrencher (HME) High Mobility Material Handler (HMMH) Manual | Next
REMOVE EXTERNAL LINES AND FITTINGS |
TM 55-2835-208-23
2-6
CLEAN AND INSPECT EXTERNAL LINES AND FITTINGS (Continued)
2-6
5.
6.
Inspect for signs of leakage around fit-
tings in fuel containment box. If there is
leakage, remove fitting and replace pack-
ings. Inspect fitting for nicks, dents or
cracks. There shall be no damage.
Inspcet for connection bolt (5) and fit-
ting (6) for signs of leakage. If there are
signs of leakage, remove bolt and fitting
and replace packing and seal. Inspect
bolt and fitting for nicks, dents or cracks.
If there is damage, remove bolts (5) and
fittings (6) ( Task 2-7).
7.
Inspect all clamps (7) and brackets for
condition and security. If loose, tighten.
There shall be no damage.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
Change 4
2-15
|
