TM 10-3930-675-24-2
ELECTRONIC JOYSTICK ASSEMBLY WIRING HARNESS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Organizational
Tools and Special Tools
References
Tool Kit, General Mechanic's (Item 128, WP 0289
WP 0048 00
Equipment Condition
Materials/Parts
Master battery switch in OFF position
NOTE
Refer to wiring diagrams in WP 0048 00 and use marker tags, as necessary, to ensure proper con-
nection of connectors.
Note position of washers on release lever to aid in installation.
REMOVAL
1.
Turn joystick positioning lever (1) counterclockwise and lift joystick assembly upward to free joystick assembly from
seat.
2.
Turn joystick housing (5) over for access to bottom of joystick housing.
3.
Remove screw (4) and clamp (2) from protective cover of joystick wiring harness (3).
5
1
350-671
4
3
2
434-40178