MWO 5-2350-262-35-1
COVER 12476192
CABLE 12481025
HOSE 12476191-3
90 ELBOW 2102-8-8
ACTUATOR ARM
(Part of assembly 15048)
NOZZLE 10250
TEE MS51513A12
BASE PLATE
12476249
SHEATH
K9190606-4-4-4C-30
HOSE 12476191-2
STRAIGHT ADAPTER
4FBTX-SS
NOZZLE 10250
45 ELBOWS
8-8 140339
SECTION VI. NOZZLE INSTALLATION PROCEDURES FOR RIGHT SIDE
(ALL VEHICLES)
NOTE
a. Using suitable machinist's ruler, measure, mark, and center punch, for drilling and tapping four holes for
b. Drill 4 x .25 x 20-UNC-2B holes .375 inch deep only and bottom end tap holes, ensuring maximum thread
depth of .375 inch.
c.
Install two brackets (Figure 3-4) with four washers (MS27183-49) and screws (B1821BH025C050N).
d. Install 90 elbow (2102-8-8) and nozzle (10250) at LOCATION F (Figure 3-4). Using suitable machinist's
protractor and straight edge, direct 90 elbow towards engine at 10 down from horizontal.
e. Install 45 elbow (8-8 140339) and nozzle at (10250) LOCATION G (Figure 3-4). Direct 45 elbow directly
towards left side of vehicle.