LO 5-3805-235-12
* KEY -
EXPECTED TEMPERATURES
Above +15 F
+40 F to -15 F
+40 F to -65 F
LUBRICANTS
CAPACITY
INTERVALS
(Above -9 )
(+4 to -26 )
(+4 to -54 )
OE/ -
Lubricating
OE/HDO 30
OE/HDO 10
HDO
Oil, Internal
Engine, Tac-
tical Service
Intervals
OEA
-
Lubricating
OEA
given are
Oil, Internal
in hours
Engine,
Arctic
of normal
-
Oil Can
operation.
Points
GAA
-
Grease,
Automotive
ALL TEMPERATURES
and Artillery
*See Note 4 for lubricant specification number.
NOTES:
OE/HDO
MIL-L-2104
GAA
M IL-G-10924
1.
FOR OPERATION OF EQUIPMENT in PRO-
OEA
MIL-L-46167
(SD), Type II
P-D-680
TRACTED
COLD TEMPERATURES BELOW -15F
(-26C).
Copy of this Lubrication Order will remain with the
temperatures above -150F (-26C). Relubricate with
o
equipment at all times, instructions contained herein are
lubricants specified in Key for temperatures below - 5 F
1
mandatory.
(-26C).
If OEA lubricant is required to meet the
temperature ranges prescribed in the Key, OEA lubricant
By order of the Secretary of the Army:
is to be used in place of OE/HDO-10 lubricant for all
temperature ranges where OE/HDO-10 is specified in
JOHN A. WICKHAM, JR.
the Key.
General, United States Army
Chief of Staff OFFICIAL:
2. OIL CAN POINTS. Each 10 hours lubricate control
linkage, pins and devises, and all exposed adjusting
ROBERT M. JOYCE
threads with OE/HDO.
Major General, United States Army
The Adjutant General
3. TRACTION WEIGHT TRANSFER CYLINDER. Every
10 hours lubricate the bottom cylinder and pivot pins and
DISTRIBUTION:
top cylinder pin, not shown, with GAA.
To be distributed in accordance with DA Form 12-
4. LUBRICANTS. The following is a list of lubricants
25B, Operator and Organizational maintenance
with military symbols and applicable specification
requirements for Scrapers.
numbers.
TA 219922
I U.S. GOVERNMENT PRINTING OFFICE: 1984 O--754-602
CARD 3 OF 3