TM 9-2350-222-20-1-5
SMOKE GENERATOR INTERMEDIATE FUEL HOSE REPLACEMENT (Sheet 4 of 5)
lNSTALLATION:
1.
Install flat washer (A) and elbow (B) onto shroud.
2.
Install new lockwasher (C) and nut (D) onto elbow (B) to secure elbow to shroud.
3.
Position elbow (B) to face toward right side of engine. Using 3/4 inch wrench to hold elbow (B),
use 1 inch wrench and tighten nut (D).
4.
Connect elbow-to-solenoid fuel hose (E) to elbow (B). Using 7/8 inch wrench, tighten hose (E)
connector to elbow (B).
Go on to Sheet 5
TA140877