TM 9-2350-222-20-1-4
HUB ASSEMBLY REPLACEMENT (Sheet 1 of 7)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Cleaning and Inspection
Assembly
TOOLS: 9/16 in. socket with 1/2 in. drive
Drift punch
Hammer
Hinged handle with 1/2 in. drive
Long round nose pliers
2-1/2 in. socket with 3/4 in. drive
Pinch bar
Torque wrench with 3/4 in. drive (0-600 lb-ft) (0-814 N.m)
SPECIAL TOOLS: Replacer (Item 20, Chapter 3, Section I)
Spanner wrench (Item 27, Chapter 3, Section I)
Handle (item 10, Chapter 3, Section 1)
Remover-replacer (Item 16, Chapter 3, Section 1)
Remover-replacer (Item 15, Chapter. 3, Section I)
SUPPLIES: Grease (Item 37, Appendix D)
Gaskets
Seal
Preformed packing
Bearing nut lock
REFERENCE: LO 9-2350-222-12
PRELIMINARY
PROCEDURE:
DISASSEMBLY:
Using 9/16 inch socket, remove
1.
and washers (C). Throw lockwashers
(B) away.
2.
Remove cover plate (D) and gasket (E). Throw
gasket away.
Go on to Sheet 2
TA253462
Change 1
14-15