TM 9-2350-222-20-1-4
MASTER CONTROL PANEL REPAIR (Sheet 60 of 65)
Master Control Panel Wiring Harness Replacement (Sheet 4 of 5)
INSTALLATION:
Position connector (A) onto panel with key to
1.
edge of panel.
Using screwdriver on screw (B) and 11/32 inch
2.
wrench on nut (C), install four screws (B), new
connector (A) to panel (E).
Apply silicone compound (Item 32, Appendix D)
3.
to all male electrical connectors of wiring
harness (F).
Connect electrical connector (circuit 14) (G)
4.
by pushing together.
Connect electrical connector (circuit 14) to
5.
starter switch (H).
Connect lead (circuit 459) to master battery
6.
switch (J).
Connect lead (circuit 37) to utility outlet
7.
circuit breaker (K).
Go on to Sheet 5
10-114