TM 9-2350-222-20-1-4
MASTER CONTROL PANEL REPAIR (Sheet 58 of 65)
Master Control Panel Wiring Harness Replacement (Sheet 2 of 5)
Using socket, remove two nuts (F), lockwashers (G), and flat washers (H) securing two harness
3.
Inspect stud (K) for stripped or damaged threads. If any defects are found, replace.
4.
5.
If necessary to replace stud (K), use 5/16 inch wrench on screw (L) and 3/8 inch wrench on stud
(K) and replace stud (K), washer (M), and/or screw (L).
Go on to Sheet 3
TA139668
10-112