SPEED CONTROL RPM ADJUSTMENT-continued

TB 5-2520-551-24

SPEED CONTROL RPM ADJUSTMENT (cont.)

23. With engine running at operating temperature, check for contact between

upper radiator hose and W-65 cable. If no contact is made, turn vehicle

engine off, then place gear shift lever to PARK, and transfer case lever to

2H.

24. If contact is made, between radiator hose and W-65 cable, turn engine off

and allow engine to cool. Using a 1/4" flat tip screwdriver, loosen screw

securing hose clamp at upper end of radiator hose. Twist radiator hose

1/4 turn clockwise. Using same tool tighten screw securing hose clamp.