REMOTE RADIO CONTROL MOUNTING BRACKET

TB 5-2520-551-24

REMOTE RADIO CONTROL MOUNTING BRACKET

In truck cab, remove and retain four bolts and one screw securing dashboard

56.

Remove

cover using 9/32" nut driver and NO.2 cross tip screwdriver.

dashboard cover. Refer to TM 9-2320-289-34.

Using 3/8" combination wrench, remove and retain nut securing instrument

57.

panel molding to dashboard cover.

Measure 6-5/8" left of center post on molding. Cut molding using saber

58.

saw.

Measure 2" right from right side edge of left hole and mark a vertical

59.

Measure 1-1/2" right from the vertical line, and mark another

line.

vertical line. Measure 2-3/4" down from upper edge where molding is

attached to dashboard cover and mark a horizontal line.

Cut a new opening

where marked using saber saw.

60.

Reinstall instrument panel molding onto dashboard cover. Secure molding

with a nut. Using a 3/8" combination wrench, tighten nut.