National Item Identification Number
00-136-1335
001361335
5970-00-136-1335
5970001361335
National Stock Number
Item Name
INSULATOR,WASHER
Federal Supply Class
5970
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-235-24P/TM-5-2410-235-24P0385.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-235-24P/TM-5-2410-235-24P0469.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-235-24P/TM-5-2410-235-24P0488.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-34P/css/TM-5-2420-222-34P_522.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-34P/css/TM-5-2420-222-34P_577.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-34P/css/TM-5-2420-222-34P_622.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-34P/css/TM-5-2420-222-34P_640.htmDescription
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
Commercial and Government Entity Code (Supplier Data)
1VPW8
GENERAL DYNAMICS C4 SYSTEMS INC.
DBA PREVIOUSLY - GENERAL DYNAMICS
8201 E MCDOWELL RD
SCOTTSDALE
AZ
85257
800-424-0052
25496
HOLT BROS
1521 W CHARTER WAY
8130
STOCKTON
CA
95208
209-464-4689
NSN (National Stock Number) 5970-00-136-1335, 5970001361335 NIIN (National Identification Number) 00-136-1335, 001361335
Part Numbers (Reference Numbers)
4A40569A01
4A40569A01
8L9352
Required Categories
STYLE DESIGNATOR
INSIDE DIAMETER
OUTSIDE DIAMETER
OVERALL HEIGHT
MATERIAL AN
Required Description
Q1 ROUND, FLAT
0.203 INCHES NOMINAL
0.750 INCHES NOMINAL
0.060 INCHES NOMINAL