National Item Identification Number
01-443-8672
014438672
5365-01-443-8672
5365014438672
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Referenced on: http://constructiontractors.tpub.com//TM-9-2320-302-24P/TM-9-2320-302-24P1070.htm
Referenced on: http://constructiontractors.tpub.com//TM-9-2320-302-24P/TM-9-2320-302-24P1213.htm
Referenced on: http://trucktractor6x4.tpub.com//TM-9-2320-363-24P/css/TM-9-2320-363-24P_1001.htm
Referenced on: http://trucktractor6x4.tpub.com//TM-9-2320-363-24P/css/TM-9-2320-363-24P_1118.htmDescription
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
64678
33287
SPX CORPORATION
DIV SPX / KENT-MOORE TOOL DIV
655 EISENHOWER DRIVE
OWATONNA
MN
55060
586-578-7445
NSN (National Stock Number) 5365-01-443-8672, 5365014438672 NIIN (National Identification Number) 01-443-8672, 014438672
Part Numbers (Reference Numbers)
KMH/302401
302401
Required Categories
Required Description