National Item Identification Number
01-301-7870
013017870
5365-01-301-7870
5365013017870
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-224-24P-1/css/TM-5-2420-224-24P-1_836.htmDescription
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
02614
CASCADE CORP
2201 NE 201ST
FAIRVIEW
OR
97024
503-669-6300
64678
Reference Numbers (Part Numbers)
613994
613994
Required Categories
BOLT HOLE QUANTITY
STYLE DESIGNATOR
OUTSIDE DIAMETER
APERTURE DIAMETER
Required Description
8
A21 CIRCULAR
0.780 INCHES NOMINAL
0.156 INCHES NOMINAL