National Item Identification Number
01-168-1409
011681409
5365-01-168-1409
5365011681409
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Description
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
7X677
7X677
NSN (National Stock Number) 5365-01-168-1409, 5365011681409 NIIN (National Identification Number) 01-168-1409, 011681409
Part Numbers (Reference Numbers)
334361 ITEM 13
334361 ITEM 13
334374
334374
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
BOLT HOLE QUANTITY
HOLE DIAMETE
Required Description
STEEL COMP 1008 OR
STEEL COMP 1010
SAE ASSN STD SINGLE MATERIAL RESPONSE
6
0