National Item Identification Number
01-106-5570
011065570
5365-01-106-5570
5365011065570
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-20P/css/TM-5-2420-222-20P_348.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-20P/css/TM-5-2420-222-20P_378.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-20P/css/TM-5-2420-222-20P_400.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-34P/css/TM-5-2420-222-34P_527.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-34P/css/TM-5-2420-222-34P_589.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-222-34P/css/TM-5-2420-222-34P_642.htmDescription
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
75160
NSN (National Stock Number) 5365-01-106-5570, 5365011065570 NIIN (National Identification Number) 01-106-5570, 011065570
Part Numbers (Reference Numbers)
T16911T
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
CONSTRUCTION
OUTSIDE DIAMETER;
Required Description
ALUMINUM ALLOY
JDM 3003,TEMPER H14,FSCM 90432 MFR REF SINGLE MATERIAL RESPONSE;